Bathroom Refresh
While we are avid consumers of HGTV and its bevy of remodeling shows, neither of us are enamored with an open concept. Nor are we lusting after a lot of the newer “high end” finished drooled over by many. The current House of Bogardi is 57 years old and somewhere in its the past, some updating has been done. The kitchen and bathrooms were done sometime in their lifespan, from the looks, sometime near the turn of the century time frame.
And while we are pretty happy with the way most things look, there are a few small items that we would like to address. The first thing we want to improve on are the bathroom vanities in both the on suite and the other main floor bath. They are dull pale yellow color with dark tops and oil rubbed bronze fixtures and while they looked OK when the walls were beige, they don’t really go that well with the green and blue we have painted the rooms. Plus they are a might too big for the smaller mid century sized rooms.
Another thig we want to do is change out 2 of the 3 toilets. The main flor bath has a newer chair height unit while the on suite and lower floor bath’s have older lower seats. Considering that when we redid the bathroom back in Aiken we put the taller chair toilets in, whenever either of us uses the lower toilets those couple of inches feel like a steep drop.
Today we took step one, drove over to Home Depot bought a vanity, facet set and wall light fixture for the blue main floor bath. The vanity is gray with a white top and because the cabinet handles are brushed nickel we also bought a faucet set and wall light in the same finish.
I was careful to measure the depth and width of the vanity to make sure it would fit in the back hatch of the Mini with the seats down. It looked like as long as there was was not too much packing material around it we would be fine. When we got to the store and dragged the vanity box out from the shelf it was under, it looked awfully big, especially in the height department. So I went up front to the Customer Service Desk to ask if they had a tape measure I could borrow. Went back and measured the box, depth 21″, width 33″ and height 38″. Strolled out to the car and had plenty for the depth, pretty close to enough for the width and height.
I returned the tape measure and we put the three items on a cart and headed for the check out. when I got to the car and stuffed our vanity in the back of the Ladybug it went right in width and depth-wise, but the height was fine at the bottom, but 21″ straight up the box was hitting the slanted hatch. I sort of forgot that the box was three dimensional. The hatch would come down and almost close, but even moving the front seats forward slightly, it wouldn’t close. So I moved the seats all the way back again and bungee corded the hatch almost shut. Because the vanity consumed nearly all the hatch area, Donna had to ride home sharing her half of front seat with the boxes of the faucet and wall light.
Some time a couple three weeks from now I’ll see how hard it is to remove the old vanity and backsplash and put the new one in.
