Month: March 2009

Disappointing

We rode the tandem in to work today, and with Wednesday’s trip on it as well, this is the first time we have commuted by bike twice in one week in a looong time.

That bike ride was the highlight of my day. I managed to only finish half of the front brake job I had planned for the Emperor this afternoon. The left front went fairly easy. I say fairly because after 6-1/2 years and nearly 90,000 miles the brake rotor and wheel hub become very fast friends. The folks who make cars know this and they put a nice threaded hole through the disc so you can separate them by cranking down on a bolt screwed in there. But, it takes a scary lot of torque on that bolt before you hear that satisfying pop when the two pieces of metal finally separate. Also one of the caliper slider pins took a bit of coaxing to go back in because with the lube spread on it, the little noise abating rubber sleeve tended to slide out of it’s groove, preventing the pin from fitting in the hole.

On the driver’s side I got the pads off, pulled the caliper and then the bracket off, the second rotor came off easier than first, but then I hit a snag. The top caliper pin was frozen solid in the bracket with corrosion. I sprayed some penetrating fluid on it. Cleaned and lubed the other pin while I waited for the magic. I hammered on the pin and tried backing it out with a 17mm wrench with as much force as I felt comfortable with to no avail. I might have upped the force level by 50% or more, but I didn’t want to break the pin or bracket because we are a one car family and I needed to at least be able to put the car back together and have it operational.

Calls to the Augusta Mazda place, a Miata.net sponsor dealer and Advanced Auto asking about a replacement caliper netted me quotes of from “Can’t Get It” to $185 and we can order it. I then tried the Mazda dealer in Columbia where they still have to order it, but they will sell me just the bracket and pin for less than half the other guys wanted for a re-manufactured caliper and bracket.

I reinstalled the old parts back on the right side and took a drive around the neighborhood to set in the new stuff on the left. The car stops fine, but there is about 4″ more pedal travel. I’m attributing this to the increased travel the left caliper needs to make up for the nearly worn out pads on that side. Still I’ll be taking it easy though until I can get the new bracket and pin on Tuesday.

If that wasn’t bad enough, the motion sensing light quit working again. 🙁

Started down, still down.
Miata Top Transitions since 10/24/08: 147

Motion Sensing Light Fixture

Our laundry room is in the garage and every time you go in or out during the night time you have to reach up and away to pull down on a chain to get the light on. After almost 20 years, my patience has worn thin and felt it was time to get a light that would turn on by itself.

We went to Lowe’s over the weekend and searched and searched and they had all manner of “on at dusk, off at dawn” devices and plenty of outdoor spotlight motion sensing lights, but no indoor types. I was just looking for something I know I’ve seen somewhere, one side screws into a socket and the bulb screws into the other side, but no dice.

When I was complaining about my inability to find this motion sensing light socket thingie to my cubical neighbor Jim on Monday he said he was in Home Depot on Sunday and had seen just what I was describing. On Tuesday Donna and I made the short trip to HD and looked all up and down their lighting section…twice…and couldn’t find anything.

Beginning to doubt the existence of such a fixture, when we got home I searched the interweb and found several places that sold them for around twenty bucks. I saved a link to place and contemplated whether or not I wanted to pay $7 to ship it.

This morning my cube neighbor said he was in Home Depot again yesterday buying some rabbit fencing to keep the hungry from his garden, saw the motion sensor fixture again and thought of me. I told him I had searched high and low and couldn’t find it. He offered to buy one for me, but I said if it was in the store, I’d find it myself. He told me it was not where I first looked, but over by the junction boxes and light switches.

Tonight Donna and I made a return trip to get one of these elusive objects. We looked up and down the aisle Jim described and didn’t see anything. We expanded our search parameters buy going slowly up and down the aisles on either side…twice…and still so no such thing.

I broke down and asked. The customer service rep behind the counter said they were at the end of aisle 4 on the right. Shazam! There they were.

First thing I did when we got home was unscrew the bulb, screw it into the motion sensor base and screw the whole thing into the wall socket. Pulled the chain to turn on the electricity, waved my hand wildly in front of the sensor and was rewarded by nothing. Crap. Unscrewed the bulb from the base, the base from the wall and put the bulb back in and it lit up pretty as could be.

All that effort and the thing doesn’t work. Now, it means a return trip to the store. Should I chance it on another cheap unit or just get my money back and just keep yanking the chain? I tried it a second time with little hope of any change and for whatever reason, it worked.

Started down, went up, back down, still down.
Miata Top Transitions since 10/24/08: 147

SyFy

WTF? The SciFi Channel is changing its name to SyFy. I’s must be out and Y’s are now the it vowel. I guess I’ll change the name of this place to “Lyfe of Bryan.” (looks vaguely Gaelic)

And because TDTVS is about to come on, in leiu of me writting something, Some scifi goodness from around the web:

Via io9 – Alien vs. Predator Game night – the chess game image is my new wallpaper.

Via Vimeo – Building the LEGO Millennium Falcon – sometimes obsession and too much time on your hands can be a good thing.

Via Trek core – Genuine Tribbles – literally “As Seen On TV”, these babies appeared on an episode of Deep Space 9.

Started down, still down.
Miata Top Transitions since 10/24/08: 145

Charlie

I have been hunting Mr. Pace on ebay for the longest time, but my $15 was never enough. In frustration I went hog wild and upped the limit by a buck and a half – we have a winner.

Started up, went down, still down.
Miata Top Transitions since 10/24/08: 145

Monday Time Out

I spent most of the evening erasing all traces of Ubuntu Linux off the laptop (I never did get the wireless card to work) and reinstalling XP. Then coincidentally I had trouble getting the wireless to work under Windows as well. But that was just a security issue and semi-easily solved. This left little or no time and motivation to blog, so here, enjoy a sunrise from our HHI weekend a couple weeks ago.

Started up, still up.
Miata Top Transitions since 10/24/08: 144

89,000 Raindrops

We made the trip east this morning for Breakfast With Laurie. For grins I decided to look for an easy geocache in Florence somewhere near the Cracker Barrel where we meet to maybe entertain us after eating Pecan Pancakes and Eggs in a Basket. Much to my surprise there was one real close, like so close it was actually at the Cracker Barrel. Q is for Quackers. How did I know? For one, its location on the map placed it right at the intersection of I-95 & US52 and secondly this phrase from the description: No rocking chairs were injured during the making of this cache. Looks like we wouldn’t even need the GPS for this one.

And it was a good thing we didn’t need it, as for some reason this morning I couldn’t download the data from the web site to the unit. I tried from both geocaching.com and the Garmin site with no luck. I tested the plugin and it said it was fine. I rebooted the PC. I turned off the GPS a couple of times and it still didn’t work. When we got home from breakfast I finally got it to work by reinstalling the firmware on the Venture HC.

About 4 miles east of the thriving metropolis of Salley, SC the Emperor crossed the 89k miles in service mark.

Oh, yeah, about that cache, we found it no problem. Thanks to the clue – Let this not wash you up for the day, the description of the cache – You are looking for a black magnetic key holder and the logs – I had to get over my shyness about sticking my butt up in the air. It was under an old timely washing bucket with a mechanical wringer in between two rocking chairs on the porch of the restaurant.

Started up, still up.
Miata Top Transitions since 10/24/08: 144

Asian Buffet

Taken just outside the restaurant the MMC was meeting at a couple of Thursdays ago. The frugal owners of the this dining establishment have taken to illuminating alternate words on their sign each night, tomorrow BUFFET will be lit and ASIAN will be dark.

OK, you got me, I just made that up. All the neon has probably leaked out of the bottom word or a transformer is bad or whatever.

Started up, still up.
Miata Top Transitions since 10/24/08: 144