Changed the oil this morning. As always I took this time to rotate the tires too. Jacked up the car and put it on 4 jack stands. This makes it easier to get to the drain plug and the filter. When spinning off the filter I always tuck a rag under where the filter is so the oil left in the filter will drip into it and not on the ground. Well, today I learned that khaki pants don’t do well when used for this job. The old cotton t-shirts absorb the oil, while khaki pants absorb a little and then act as a conduit for the oil to pour all over the underside of the car and then drip on the driveway. At least the tires rotated without incident, even the semi-mangled lug stud and lug nut cooperated fully.
After I put the car all back together, I went ahead and washed it. Had to use some bug remover on the nose to get off the stubborn bug guts off, so a quick bit of wax applied to the area. I keep reading about using a clay bar on the car and wonder if that would completely clean everything off the paint. But because it seems like such a production, maybe an all day affair, that I have been avoiding it. Maybe a fine fall Saturday could be set aside for that project.
Miata Top Transitions since 01/01/05: 256